Pipework Insulation Contractors
Mechanical pipe insulation involves covering pipes with materials that resist heat transfer, helping to maintain desired temperatures. It is installed by wrapping or fitting insulating materials, typically made of foam or fibreglass, around pipes. This thermal insulation is crucial in HVAC systems as it prevents the loss of heat from heated water or the gain of heat in cooled water as it travels through the pipes. By reducing heat exchange with the surrounding environment, mechanical pipe insulation significantly minimises energy wastage. This is particularly vital in buildings as it contributes to lower energy consumption, leading to cost savings and a more sustainable operation.
Thermal Insulation for Pipes
Mechanical pipe insulation serves multiple important purposes. It reduces heat transfer to and from pipes, which is crucial for heat conservation. This is used in systems like LTHW (Low-Temperature Hot Water) for radiators, Fan Coil Units (FCUs), and other heating equipment in buildings. It’s also important for HWS (Hot Water Pipework) in places like apartments, hospitals, offices, and schools.
Insulating pipework also prevents moisture buildup from condensation on cold surfaces. This is needed for CHW (Chilled Water) systems in cooling equipment and MCWS / BCWS / CWS (Mains, Boosted, and Cold Water Services) for taps, as well as drainage systems like RWP (Rain Water Pipework) and SVP (Soil Pipework). Mechanical pipe insulation not only prevents condensation-related corrosion and structural damage but also helps reduce disruptive noise from such pipework.
Additionally, installing pipe insulation safeguards people from touching exposed pipes. This is used in systems like Steam, MTHW (Medium Temperature Hot Water), and HTHW (High Temperature Hot Water) in industrial settings. It keeps workers safe by minimising contact risks such as scalds and burns.
Your Expert Pipe Insulation Installers
As leading pipe insulation contractors, we can fulfil your needs thanks to our deep understanding of the industry. We have a qualified, efficient team on hand to assist us in exceeding any project’s goals. Our specialists also have the proper training to perform installations on-site.
We are proud to have been in the industry for more than 20 years, providing us with a wealth of knowledge, and to be accredited as safe contractors. Our goal is to provide a friendly and effective mechanical pipe insulation service in which we work hard to meet your requirements. Our company is supported by a highly qualified crew that specialises in applying different kinds of insulating materials for HVAC, industrial and commercial pipework and ducting projects.
We are also fortunate to have solid ties with a number of our pipe insulation suppliers, so our supply chain is both wide and reliable. We choose suppliers who stock various insulating materials, ranging from the most commonly applied products: phenolic foam, mineral wool and nitrile. We frequently provide our customers with the brand of insulation they like because our suppliers can acquire these materials directly from the big manufacturers.
Our supply chain has offices located countrywide. This allows for the improvement of operations as we can source materials from various locations, providing additional flexibility to cope with “out-of-town projects” and unexpected events that could delay or jeopardise projects.
Sectors we serve
Manufacturing
Education
Health Sector
Industrial
The Key Benefits of - Pipework Insulation
01.
Insulated pipework reduces energy waste
One of the most important benefits of insulated pipework is undoubtedly the reduction of energy waste. Pipe insulation significantly lowers heat loss around pipes whilst also acting as a moisture barrier. It leads to much improved thermal performance and higher operating efficiencies, therefore, lower operating expenses. You can help to protect the environment and simultaneously spend less on energy bills, a win-win.
02.
Increased safety with insulated pipework
Working with a mechanical pipe insulation contractor can help improve the safety of your building or warehouse. This is because thermal pipe insulation significantly reduces the risk of burns from contact with pipes, which is particularly vital in factory environments where pipes can reach extreme temperatures. Additionally, in warehouse settings, slips and falls are common occurrences. By insulating pipes and ducts, you can also prevent condensation buildup, which prevents water from dripping onto floors, subsequently avoiding potential trip and fall hazards.
03.
Pipework insulation helps reduce condensation
It’s very possible for corrosion to occur on pipes due to moisture forming on them, and it can take even longer for the moisture to dissipate completely. If your pipes become corroded, they will need to be replaced and this is costly. Insulating pipework reduces condensation and allows you to stay one step ahead of potential corrosion to your pipes. In the long run, this will save you money and time and will allow you to feel much more secure.
04.
External pipework insulation prevents pipe damage due to freezing
Pipes are very susceptible to freezing, especially when located in areas of buildings that don’t benefit from heating, and this often leads to the pipe bursting. When properly applied, external pipework insulation helps to prevent pipe damage due to freezing as it stops cold air from entering and freezing the contents. The cost of repairing damage to pipes can be extremely high, so it’s advisable to employ the services of a professional pipe insulation installer to ensure your pipes are insulated correctly, saving you money in the future.
Cut Down Your Energy Expenditure
Thermally insulating the pipework and ductwork within a building can help reduce the energy expenses of the building.
By working with Thermal Clad Ltd to insulate the building services, you'll save money and minimise the amount of energy wastage.
Why choose Thermal Clad?
| What You Get | Thermal Clad | Company A | ||
|---|---|---|---|---|
| Free Consultation | ||||
| Keen Eye For Detail | ||||
| Eco Friendly | ||||
| Bespoke Quotes | ||||
| Industry Experts | ||||
| Quality Assurance Guarantee | ||||
Our Projects
Works included insulation to heating, chilled water, domestic services, as well as ductwork, throughout 2no. high-rise tower block buildings
The works included the insulation and cladding of identical units and associated ductwork.
Works included insulation to ductwork in relation to 2no. large kilns and 1no. large drier. This is one of our largest projects to date.
The works included the trace heating, insulation and cladding of pipework systems with the installation of jackets to valves, flanges and instruments at an AD plant facility.
Insulation work here included grey Velcro insulation mats to valves and flanges as a better alternative to aluminium clad boxes.
We installed electrical trace heating for frost protection on numerous surge vessels on site to upgrade the water supply system.
Thermal Clad installed insulation and cladding of a new steam distribution system at Oxoid, a part of Thermo Fisher Scientific.
We completed the installation of pipework and vessels to clear up sewage before putting water back into the river.
Entering into the renewable energy space, we installed an ESP (Electrostatic Precipitator) unit.
Works included insulation to heating and chilled water services, as well as ventilation throughout the building.
The UK's Leading Insulation Experts
Over the last two decades, we have helped many commercial and industrial businesses with their pipe and ductwork insulation. No matter how complex your system is, we guarantee that we have the expertise needed to insulate it.
But you don't have to take our word for it; read what our happy clients have had to say about our fantastic insulation services.
T. Evans
Project Manager
C. Enfield
Project Manager
I. Smith
Project Manager
M. Sumner
Business Manager
G. Harris
Project Engineer
V. Keep
Project Supervisor
M. Powers
Project Manager
Expert Guides
Our goal at Thermal Clad is to not only provide our customers with the finest service possible but also to keep them informed about new products and industry trends.
Please feel free to check out some of our expert insulation guides below:
Expert Guide – Cladding Expertise
Various types of sheet metal cladding can be used to cover insulation. This protects against the elements and can…
Thermal Insulation Materials: 4 Types of Materials Used in Thermal Insulation
The importance of choosing the right material for thermal insulation Thermal insulation is the reduction of the transfer of…
Rock Mineral Wool Insulation Vs Glass Wool Insulation
Rock Mineral Wool Insulation & Glass Wool Insulation Rock Mineral Wool & Glass Wool Insulation Types: What are they…